JUC Pulling Tool

Oops! Something went wrong while submitting the form.
Request a Quote
Arrow Pointing Left
Arrow Pointing RIght

Purpose

JUC Pulling Tool is designed in such a way that it has a long core with a short reach. The “JU” series is divided into three parts named as JUC-U, JUC-2, and JUC-TD. The JUC-2 increases the limit of OD to maximum whereas JUC-U and JUC-TD reduce the value of OD

Operation

Used when there is a need to jar up to shear off of a subsurface tool and/or fish when a jar down tool is not desired. The core may be easily changed in the field to allow for a deeper or shallower reach depending on application. The BT JUC pulling tool is able to be turned into a BT JDC by simply changing the fishneck and adding a core cap.

Precautions

Ensure the proper core is installed so as the tool can properly be sheared, the improper core may result in the inability to release the subsurface tool and/or fish.

Care should be taken to inspect the dogs, skirt, and fishneck for damage such as metal . fatigue, cracking , or deformity of the metal.