Learn How To Use Brace Tool Equipment and Enhance Skills.

How to Assemble The Brace Stuffing Box Assembly

How to assemble the Brace Tool Slickline Stuffing Box assembly...

How To Assemble The Brace Mechanical Tubing Punch

I’m Clint Bowers of Brace Tool and today I’m going to show you how to assemble and disassemble a 2-7/8 Mechanical Tubing Punch. A Mechanical Tubing Punch...

X lock setting selectively in the nipple

How to set the Otis X lock in the nipple profile...

X running installation on the x lock

How to install the brace tool X Line running tool to an Otis X Lock. Slickline, wireline....

1.87 B Shifting Tool

This video shows how to disassemble and reassemble a 1.87" B Shifting Tool.This tool is used to open and close various types of Sliding Sleeves with Otis...

How To Assemble The Brace JDC Pulling Tool

Assembling the two inch JDC pulling tool. We’ll start with the skirt, down, threaded end up. We’re going to install the dog. Push the dog on over the...

How To Assemble The Brace SB Pulling Tool

Today we’re going to assemble a two inch SB pulling tool, and I’ll start now. So you take your skirt, put the bottom end facing up, install your dog...

How To Assemble The Brace X Line Running Tool

Today I’m going to assemble a two inch running tool. First of all, you want to install your dog spring into your dog housing, grease it up pretty good,...

How To Assemble The Brace Hydraulic Tubing Punch

Hello. I’m Clint Bowers of Brace Tool and today I’m going to assemble a Hydraulic Tubing Punch. But before I start I want to explain something about the...