P Running Tool
To run lock mandrels with equalizing assemblies that require prong mandrels.
The BT “P” running to is a simple design, consisting of one part.
The tool consists of a single housing with tangential shear pin holes, and a recess to accommodate a prong fishneck.
Pin desire lock (with equalizing assembly) onto running tool, and attach to tool string.
Lower toolstring into wellbore to desired depth above landing nipple. (static and pull weights should be taken at this time)
Lower into landing nipple and jar down to seat no-go / V-packing into landing nipple.
Jar up to shear pins in running tool and remove tool string from wellbore