Tubing Sampler

Oops! Something went wrong while submitting the form.
Request a Quote
Arrow Pointing Left
Arrow Pointing RIght


To retrieve solid wellbore samples.


BT Tubing Sampler are made up of 4 components:

1. Fishneck 2. Mandrel 3. Gauge Ring 4. Junk Basket


Install the Tubing Sampler with the desired size of gauge ring to the tool string and hoist into the lubricator. Lower into wellbore as one would normally run a gauge ring, debris that is removed from the tubing wall with the gauge ring will be trapped in the Junk Basket.


Sand, paraffin, or damaged tubing may cause gauge ring to become stuck or wedged, care should be taken if adverse conditions are expected.