X Equalizing Assembly

X Equalizing Assembly

Purpose

Provides a single run to set and a single run to pull plugging system.

Description

The “X” equalizing assembly consists of three parts:

1. Valve Housing2. Equalizing Valve3. Valve Cap

The valve housing connects to the packing mandrel of the “X” lock assembly.

Application

The “X” plugging equalizing assembly can be used for other applications such as electronic shut in tools, check valves etc.

Operation

The “X” equalizing plugging assembly is made up to the pin end of the “X” lock assembly packing mandrel.

The lock assembly is pinned to the “X” running tool and running prong.

The “X” running tool is set in the desired running position and lowered in the well to the desired nipple depth and set.As the running tool is sheared from the set plug, the running prong pulls the equalizing valve to the sealed position.PrecautionsBe sure full equalization has been achieved before upward jarring is commenced when pulling the plug assembly from the nipple profile.

Download Technical Datasheet

Sales & Support