Gauge Ring Solid

Oops! Something went wrong while submitting the form.
Request a Quote
Arrow Pointing Left
Arrow Pointing RIght


The Gauge Ring Solid is used for gauging the drift size of the tubing I.D. and for clearing the build ups formed inside of the tubing.


Drifting tubing and locating tight spots and drifting seating nipples. Cleaning light scale and paraffin from the inside of the tubing walls, nipple bores and packer bores. Locating nipple depths.


Attach to the tool string and lower into the wellbore to desired depth. In most completions, the tubing will have a known restriction such as a seating nipple which will be the known run depth. When tight spots are encountered a few moderate downward jars may work the gauge ring through. If this does not work remove the tool string from the wellbore and use an alternative method to rid the tight spot from the tubing.


Check O.D. of lower body section regularly, to avoid running undersized gauge rings for the intended application.

* Custom Diameters and thread connections are available. *